|
In power engineering, a one-line diagram or single-line diagram (SLD) is a simplified notation for representing a three-phase power system.〔 〕 The one-line diagram has its largest application in power flow studies. Electrical elements such as circuit breakers, transformers, capacitors, bus bars, and conductors are shown by standardized schematic symbols.〔 Instead of representing each of three phases with a separate line or terminal, only one conductor is represented. It is a form of block diagram graphically depicting the paths for power flow between entities of the system. Elements on the diagram do not represent the physical size or location of the electrical equipment, but it is a common convention to organize the diagram with the same left-to-right, top-to-bottom sequence as the switchgear or other apparatus represented. A one-line diagram can also be used to show a high level view of conduit runs for a PLC control systems. ==Balanced systems== The theory of three-phase power systems tells us that as long as the loads on each of the three phases are balanced, we can consider each phase separately.〔 〕 In power engineering, this assumption is often useful, and to consider all three phases requires more effort with very little potential advantage.〔 〕 An important and frequent exception is an asymmetric fault on only one or two phases of the system. A one-line diagram is usually used along with other notational simplifications, such as the per-unit system. A secondary advantage to using a one-line diagram is that the simpler diagram leaves more space for non-electrical, such as economic, information to be included. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「One-line diagram」の詳細全文を読む スポンサード リンク
|